Author Archive: paul

HOW LONG DOES A NEW ROOF LAST

Picture of a new roof being installed.

INTRODUCTION

If you are considering roofing your house, and wondering how long your roof will last, this article is for you. The roof is one of the most important parts in a house. There are various types of roofs in the market today. They all have different lifespans and different costs. You may have to decide on which roof to use, how much it will cost you and its durability. This information below is brought to you by a roofing contractor in Hendersonville, TN. They have been in the roofing industry for many years, and are very knowledgeable about the lifespan of residential and commercial roofs.

 

ROOF TYPES AND THEIR DURATION

 

· TILE ROOFING

Tile roofing is one of the most commonly used forms of roofing. It is of high quality and is durable. Its life span is at least 50 years, and it does not require too much attention and maintenance. This is definitely a roof you should consider.

· SLATE ROOFING

Slate roofs are of high quality too but more expensive. They are not commonly used. Their life span goes up to 100 years. You only need to install it properly, and it will serve you for a very long time.

· WOOD SHINGLE AND SHAKE ROOFS

This type of roof lasts between 20-30 years. Upon installation, it is important to keep this roof dry at all times. The moisture leads to gradual damage of the wood. Ensure that the roof is clean always. This ensures that no moisture is retained by the leaves and dirt. Keep the underside of the roof well ventilated too, for maximum durability.

· METAL ROOFS

Most of the metal roofs last between 20-40 years. Sometimes they last even longer. This is the kind of a roof that does not require a lot of attention. You only require professional installation and you are good to go. Purchasing the high-quality metal roof increases the lifespan of your roof. The metal roofs may have been used early in the day, but “old is gold”!

· ASPHALT ROOFS

The asphalt roofs have a lifespan of about 15-20 years. It does not require too much attention too. Let professionals install it for you, and inspect it once in a while. That way you will get its maximum durability.

HOW TO MAKE YOUR ROOF LAST LONGER

 

· Monitor the attic

This ensures you spot any signs of insects and soft spots on the roof for maintenance. Insect infestation on your roof can cause a major damage on the roof if not detected early.

· Cleaning the gutters

Clean the gutters especially after fall. Collect all the leaves and dirt. Ensure that the brackets holding them against the house are in place. This way you increase the lifespan of your roof.

· Roof inspection

It is important to ensure a regular roof inspection by a professional. This is because doing the inspection yourself may not be effective.

· Do not walk on the roof

Roofs are fragile. Walking on them can cause them to come loose or even crack. You do not want to have to reroof your house because of this simple mistake.

· Cut any overhanging tree limbs

Overhanging tree limbs may eventually fall on your roof and cause damage. Cutting them immediately you spot them is important.

CONCLUSION

The trick to ensuring that your roof lasts long is to purchase a high quality and the most suitable roof. Ensure that it is installed properly by a professional. Clean it, maintain it and keep inspecting it. Inspections by a professional are more effective.

We all want a comfortable home, and a long lasting roof!

Home Insulation Tips That Will Save You Money

Picture of a house with scarf around it.

Home insulation is arguably the most important factor when it comes to increasing the energy efficiency of your home. You can massively reduce the amount of heat you lose through your walls and roof, which in turn reduces the amount of energy you use. Contact your local roofing company for cost estimations regarding professional home insulation.

This cuts back on your energy bills as less heat is needed to keep your house warm. Home insulation is where it is at if you are looking to go green and save money.

Utilizing home insulation also reduces your carbon emissions, which is very important for the world today in terms of reducing your environmental footprint. Here are a few home insulation tips that you can use to lower your heating bills during the winter months.

Infographic

Photo by: Margret C. Hernandez

Use weather stripping around doors and windows

These are the two most common areas in homes that most heat is usually lost. It is inexpensive to insulate these two places in and around your home. It is also very easy, which means that you can even do it yourself, saving the cost of hiring a professional insulation provider to do it for you.

Insulate the basement areas of your home

When it comes to home insulation, most homeowners forget the basement simply because it is out of view. However, it is also an area in a home where a lot of heat escapes. It is highly recommended that you cover up crevices, crawlspaces, and other small spaces in and around your basement to make sure that your home insulation is effective.

Make use of window blinds and curtains

You can significantly reduce heat loss by simply using your curtains and blinds. These can be closed at night and kept open during the day to let in sunlight to naturally heat the house. Natural warming keeps you and your family comfortable, and keeping them closed at night will reduce heat loss, thus making your insulation more effective.

Use foam to cover small spaces

It is essential that you cover as many small spaces you can find as they let out a lot of heat. You can even use expansion foam to cover such places. One small uncovered space may seem insignificant however many small spaces added up together can result in a lot of heat loss which will ultimately increase your energy bills.

Building insulation can be categorized into four types- loose fills, batts, rigid boards and expanding sprays. The most popular type of insulation used in houses is loose fill insulation. This is because of its ability to reach areas where other insulation material can hardly reach.

The resistance to heat flow of the insulation material depends on the location of your house as well as the part of the house you want to insulate. The greater the resistance the more the material will be able to insulate. The value can range from 0 to 40. Insulation material with a smaller value is good for areas with relatively higher temperature and higher value materials are used in places with a colder climate.

These simple tips will help improve your home insulation. Not only will they help keep you and your family warm in winter, they will also help reduce your energy bill.

Environment-friendly insulation products are also available in the market these days. The best time to consider updating your home insulation will be during a house remodel project. However, if you are not planning to remodel the house sooner, then think carefully before deciding to add or replace insulation in your place of stay.

The Benefits of Installing An Outdoor Faucet

Picture of an outdoor faucet

Apparently, water faucets are quite prevalent in our everyday use. They aid in providing a convenient water supply for any outdoor activity. These taps are usually installed indoors mostly in kitchens and bathrooms, although, currently there are also outdoor faucets commonly placed outside in the backyards or on the walls. The outdoor faucets mainly supply water for landscaping and any other outdoor utility. Since they are placed outside, manufacturers produce them with materials that can withstand rust and any adverse weather condition.

Some of these outdoor faucets include:
. The ball valve tap commonly made from plastic or brass and which has a single hole through it.
. The spigots and hose bibs mostly placed in the backyards and on the outside walls. Both taps have compression valves which regulate the rate of flow of water through them.
. Frost-free faucets commonly used in cold areas, specially made with a long metal pipe extending inside the walls to prevent damages that could arise from the severe weather condition.
. The anti-siphons, usually attached to the outdoor faucets for preventing contaminants from sucking back into the valves of the faucets.

Benefits of installing an outdoor faucet:

1. Having an outdoor water faucet is ideal for cleaning foods such as fish and getting them into the house when they are ready for cooking rather than bringing them inside with the unwanted parts. For instance, in the case of fish, it ensures much of the unpleasant odor is left outside.

2. Having an outdoor faucet is an excellent idea for campsites for general cleaning purposes ( such as washing clothes, kitchenware, chairs, cots among other uses).

3. The presence of an outside tap helps in other cleaning purposes such as car washing or washing your rugs. Washing your car with an ample supply of water makes the task much easier as well as giving you amazing results.

4. Outside taps are also ideal for garden cleaning and maintenance. Activities such as lawn mowing, weeding the flower beds, or attending to your garden is much easier with an outdoor tap and ensures you don’t bring dirt into the house.

5. Outdoor faucets also help you to clean your pets especially the dogs comfortably from outside ensuring no dirt is brought inside unlike when cleaning a pet from inside the house.

These are some of the benefits of having an outside faucet. However, you can consider installing either a hot or cold water tap outside your home depending on the purposes of the installation.

Written by: Suesuzzie

How to Remove Roof Shingles

how to place roof shingles

A roofing repair company in Jupiter, FL have given us some insights on how to remove roof shingles. A misconception is that shingles are only the asphalt kind. In fact, they can be made of slate, clay, metal or wood. Your roof is considered a shingle roof if it is not a single piece of material covering the roof.

In any DIY activity, safety is important. This is not just your own personal safety but also that of your surroundings such as the doors, windows, and landscaping. Make use of a roof jack to prevent sliding of debris. In warm weather, asphalt shingles can be damaged simply by walking over them. Check the supports of the roof and stick to those paths. Take note of softer areas where sections could break and cause you to fall.
Using a roof shovel is the fastest way to remove shingles and often the nails as well. Begin with the ridge cap shingles. Continue removal of shingles and the underlayment (waterproofing felt paper) in 2 – 3 foot wide sections. Work downwards with the jack. Move back to the top when beginning the next section. For optimal productivity, keep new shingles at hand.

A major part of removing shingles is the actual clean up. Have someone to assist you by catching any debris thrown down. This will minimize cleaning up later. Begin removal in the area furthest from the debris container. Dump debris regularly. If you cannot place the container close to the building, create a makeshift dumping area by placing a tarp on a flat area as close as possible.

Protect roof flashing and sheathing. Exposed boards can be covered with a tarp temporarily overnight. Water can be applied and an ice barrier can be laid along the edge of the roof covering 36 inches up. Avoid wrinkling. Sections can overlap 6 inches. If a second covering is required, overlap by 4 inches. Cover the rest of the roof with 30-pound asphalt-saturated felt.

Do not damage roof flashing as these can be reused. Rusted, cracked or valley flashing must be replaced. Flashing with a lot of tar have been repaired previously. These will also need to be replaced. Work carefully in these areas. Gently pry up the flashing. Set aside once nails have been removed.

Once you are down to the last 2 or 3 feet, do not pry shingles and underlayment all the way up as they can fall. Rather work loose with your hands.

Inspect the roof for any nails, loose areas that need to be nailed again or underlying damage including cracked or rotting boards.

Check gutters for nails and loose granules. Don’t forget to use a broom magnet over the yard when cleaning up. Small pieces of debris can be missed no matter how carefully you may have worked.

Written by: Thomson

 

We hope you enjoyed the article, if you have any insights you would like to share, please feel free to visit our contact page.

Special thanks to Pro Roofing FL for providing some information for us.

Pro Roofing FL

3900 E Indiantown Rd. Ste 607-111

Jupiter, FL 33477

(561) 287-3106

https://www.facebook.com/Pro-Roofing-FL

Why You Should Have Your Water Heater Serviced Once A Year

storage tank heater

A water heater is something that people install, then forget about until it stops working properly. The only time we think about it is when our warm water turns cold. While no one can calculate the exact life span of a water heater, a well maintained, high quality water heater can last 9 to 10 years. What if you could extend the life of your water heater by getting it serviced once a year?

Benefits of having your water heater serviced once a year:

1. Increase Efficiency:

If you have heard knocking or banging noises coming from your heater, this is a indication that you need to have your water heater serviced and flushed. Sediment accumulation is very common, and can make your water heater less effective. Sediments, produced by the minerals in the water, settle at the bottom of the water heater, making it hard to generate hot water. Getting your water heater serviced once a year will prevent this. You will get hot water faster and quicker.

2. Lower Electricity Bills:

After your cooling and heating systems, it is your water heater that uses the most energy. Faulty water heaters use more energy to heat water, which will increase your electricity bills. Through yearly maintenance, you can have the highest levels of efficiency, which converts into lower electricity bills.

3. No Costly Breakdowns:

Having your water heater serviced every year, will arrest any mechanical or other issues from developing and causing serious problems in the future. Any corrosion’s, leaks or other issues can be prevented by a yearly maintenance. This will save you a lot of money that you may need to spend on future repairs. It will also allow your system to perform at a 100% efficiency.

4. No Awful Surprises:

No one likes to have a cold shower or have a flood in their house from their damaged water heater. Getting your water heater serviced regularly will prevent these bad surprises.

5. Longer Lifespan:

The better your system is maintained, the longer it will last. That translates into a reduced net cost for you.

6. Hot Water When You Need:

A properly maintained and serviced water heater is one that will meet your daily requirements for hot water. A neglected heater will take longer and longer to produce the required hot water. Your time is wasted.

Water heaters do not have a particular time or season where they are used more. They undergo the same level of stress throughout the year. It does not matter when you schedule your maintenance, as long as it is done every year. Stick to the same time of year and reap the benefits.

 

Written by: sangee_sks

Different types of roofing materials and prices

roofing costs

When you either think of home remodeling or home constriction, the roofing plays the foremost and most vital role. This is widely known fact that, roofing not just protects and safeguards your house, but also gives it a stylish appearance. With a number of different roofing materials available, the price of all these materials also varies to a great extent. It can be as minimum as a cost of dirt and as high as to touch the sky. Well, keeping the other elements of labour, different seasons and prevailing marketing conditions aside, the cost of roofing materials can make your complete project go up and down. Here is a list some of the best and basic roofing materials which vary moderately and gives you a great budgeted roof shield for home.

roofing

Starting from the low-cost roofing materials which are listed into:

· Asphalt Shingle

· Composition Shingle

· Rolled Roofing

To the medium-cost landing roofing, this is:

· Standing steam metal roofing

· Metal Shingle

· Tile

· Rubber

To high-cost roofing, as:

· Slate 

· Copper

· Green Roof

Let’s discuss about each roof and their impact on your house!

1. Asphalt and composite Shingle: This shingle is the most popular and the most common roofing shingle you see these days. The asphalt shingle is made with fiberglass mat, and comprises asphalt and mineral granules on top. This shield is also easy to obtain and replace, but usually doesn’t look very attractive because of its flat exterior.

2. Rolled roofing: This roofing is one of the handiest and most affordable roofing. When you are to have affordable and beautiful home renovation, rolled roofing can be considered as one of the best options. This shingle comes in sheets of 100 square feet and is also best suited when you layer them over the existing roofing, easily.

3. Metal roofing: Long gone are the days when metal roofing was only suited for warehouses. These days, we also see the use of this roofing in the industries, some large mansions and many more. Though this roofing is considered a little expensive, this also attracts you the benefit of a fine resale value. Though it is strongly believed that metal roofing is a great attractor of lighting, but the logic remains pointless. Metal roofing, doesn’t in any way, becomes a reason of lightning strike.

4. Slate Shingles: The well-known slate is a real stone and this looks flawless when roofed to your house. Alongside the slate shingles offer protection and safeguards your house in the best way, taking into consideration, nothing less. It is relatively very easy to cut off the slate shingles into thin layers, which makes it even easier to quarry. The slate shingles are the real slates and they don’t comprise rubber. This is a very smart choice of the present day home owners, since this brings well protected shining to your home. The slate shingles possesses high cleavage abilities, and therefore stands among the superior roofing quality. With its cost varying over installed roofs, slate shingle is a nice formation which gives layered and beautiful exterior protection to the house.

5. Copper roofing: Undoubtedly one of the best premium roofing materials, the copper roofing has been into use since thousands of years back. This roofing shingle has been upgrading in its appearance over the years and comes with so many benefits. It has features which comprise earthquake and wind resistant abilities. The copper shingles does not have any maintenance charges. This shingle is effectively used next to salt water bodies, and still not loses its exterior and resistance features.

6. Green Roof: Are you looking for a well protected and beautiful lawn at the rooftop of your house? Well, this is not impossible anymore. You can do this with a Green Roof shingle. This roofing has features of waterproofing, drainage and roof repellent system, and creates a majestic green roof which makes the outdoor greenery, real and possible into your home. The additional benefit with this roofing is that, you can also grow plants on it. This is a little expensive roofing and makes your house exterior looks green and beautiful.

There are so many ideas of roofing that you can beneficially take up. All of these materials come in different price range and makes you home roofing, sustainable and adequate. Keeping your budget constants in mind, you can choose the roofing you want for your home.

 

Written by: vincentoloo1992